DANUSER MACHINE CO

21009

HAMMER LM40 (LOADER MT)

Drives fence posts, signposts, guard rails, median dividers, tent stakes, T-posts, pipe fence, and railroad ties with ease. Model LM40 has a 40” drop hammer design. With this innovative design, you can achieve a full stroke with every cycle or utilize the short stroke feature to fine-tune your depth. The Hammer DOES NOT operate with springs, hydraulic cylinder, or return line. Grapple option can be added to any model for a true one-person operation (does not include T-posts). The grapple option will allow the operator to grab the post off the ground, load it into the machine, and drive it in the ground without leaving the skid-steer seat. The tilt feature allows up to 20˚ in each direction. The hammer weight is 300 lbs. from the factory. Additional weight can be added for a total of 500 lbs.

 NOTE:  If post/pipe diameter is 5" or smaller and you have a helper, PN 21395 Donut Strike Plate must be purchased separately. If driving with one person, PN 21212 Horseshoe Strike Plate is a better option. See Accessories tab below.


Warranty
1-year

Post Dimensions: T-post to RR Tie
Impact Force: 82,000 lbs.
Length of Stroke: 40
Hammer Weight: 300
Strokes per Minute: 35

 

Model LM40 w/ Tilt Model LM40 w/ Tilt and Grapple
Overall Length 45.5"
Overall Width 25.5"
Overall Height 64"
Tilt (side-side) 20°
Machine Weight 1,076 lbs (1,276 lbs w/ additional weight) 1,116 lbs (1,316 lbs w/ additional weight)
Hammer Weight 300 LBS (500 LBS MAX)
Length of Stroke 40"
Max. Strokes per Minute 35
Hydraulic Requirements 1500-3000 PSI
*12-30 GPM
Tractor Requirements 75 HP minimum
Maximum Post Width 8.5" x 9.25"
Impact Force 82,000 lbs @ 500 lb weight
Impact Energy 1,025 ft-lbs @300 lb weight;
1,709 ft-lbs @ 500 lb weight

 

*Hammer will still operate on machines with less than 12 GPM
with fewer strokes per minute.

Post Dimensions: T-post to RR Tie
Impact Force: 82,000 lbs.
Length of Stroke: 40
Hammer Weight: 300
Strokes per Minute: 35

 

Model LM40 w/ Tilt Model LM40 w/ Tilt and Grapple
Overall Length 45.5"
Overall Width 25.5"
Overall Height 64"
Tilt (side-side) 20°
Machine Weight 1,076 lbs (1,276 lbs w/ additional weight) 1,116 lbs (1,316 lbs w/ additional weight)
Hammer Weight 300 LBS (500 LBS MAX)
Length of Stroke 40"
Max. Strokes per Minute 35
Hydraulic Requirements 1500-3000 PSI
*12-30 GPM
Tractor Requirements 75 HP minimum
Maximum Post Width 8.5" x 9.25"
Impact Force 82,000 lbs @ 500 lb weight
Impact Energy 1,025 ft-lbs @300 lb weight;
1,709 ft-lbs @ 500 lb weight

 

*Hammer will still operate on machines with less than 12 GPM
with fewer strokes per minute.

PART ID DESCRIPTION
21163 Hammer Additional Weight Kit
21149 Hammer T-Post Adapter
21212 Plate- Floating Horseshoe
21280 Plate- Guard Rail
21395 Plate- 5" Donut
21014 Hammer EM40/LM40 Grapple
21278 CB40 Breaker Kit
196056 Front-End Loader Hose Kit