HINIKER COMPANY

507201

72" CHOPPER W/SPOUT - 5710 FLAIL FORAGE HARVESTER

 

Hiniker is a seasoned forage harvester distributor in North America. Whether you’re chopping green forage for cattle feed or shredding crop residues after harvest, you’ll find that the Hiniker 5710 Flail Forage Harvester offers outstanding versatility from a simple, reliable design. By using the 32-knife flail cylinder as both cutter and impeller, the expense and maintenance of a separate conveyor and blower system are eliminated. The adjustable discharge spout assures even front-to-rear loading. Or you can open the rear discharge door to bypass the spout and spread the material evenly on the ground. Cutting height ranges from 2-10 inches (5-25cm) and can be controlled with a manual ratchet jack or by a hydraulic cylinder. An adjustable shear bar changes the length of cut of the harvested material. To keep things running smoothly, all 5710’s come with constant-velocity P.T.O. drive shafts and overrunning driveline clutches, reducing wear and tear on driveline components during turns or when shutting down the P.T.O. A slip clutch provides overload protection. 

 

 

 

 

 

Hiniker is a seasoned forage harvester distributor in North America. Whether you’re chopping green forage for cattle feed or shredding crop residues after harvest, you’ll find that the Hiniker 5710 Flail Forage Harvester offers outstanding versatility from a simple, reliable design. By using the 32-knife flail cylinder as both cutter and impeller, the expense and maintenance of a separate conveyor and blower system are eliminated. The adjustable discharge spout assures even front-to-rear loading. Or you can open the rear discharge door to bypass the spout and spread the material evenly on the ground. Cutting height ranges from 2-10 inches (5-25cm) and can be controlled with a manual ratchet jack or by a hydraulic cylinder. An adjustable shear bar changes the length of cut of the harvested material. To keep things running smoothly, all 5710’s come with constant-velocity P.T.O. drive shafts and overrunning driveline clutches, reducing wear and tear on driveline components during turns or when shutting down the P.T.O. A slip clutch provides overload protection. 

 

 

 

 

 

Cutting Width

Cutting Height

P.T.O. RPM

Weight (w/tires)

Knives

qty & type

Rim Size

6 Feet

(1.83 M)

2-10 in.

(5-25 cm)

540

1880 lb

(855 kg)

32 Cup Knives

5.5 x 15 inch

Optional Equipment

  • A hydraulic cylinder or ratchet jack for cutting height control.
  • 7.60 x 15 Ribbed tires (as shown)

*  ADDITIONAL BACK FREIGHT CHARGE AND SETUP CHARGES APPLY